PCI Riser Card 5 V 32-bit 2 Slot passive

Edge connector X1 of the riser card is inserted in a free 5 V 32-bit slot on the PC motherboard. Slot X2 is then connected and ready for use.

The second PCI slot X3 receives its special signals for bus arbitration and interrupt control via the cable from card X4, which is inserted in any other slot on the PCI motherboards.

The assembly does not contain any active components. This means that the board is suitable for operation with V(I/O) = 5 V as well as V(I/O) = 3.3 V. The coding of connectors X2 and X3 with this variant is for V(I/O) = 5 V.

Caution:

Please note that pin 1 of X1 must always be connected to pin 1 of the slot on the motherboard.

Note:

Passive riser cards generally do not fulfill all requirements of the PCI specification. Our product range also includes active riser cards. These fulfill all requirements of the PCI specification but are more expensive due to the use of active components. Please contact us about any questions you might have.