Decoration: hatching
For navigation please use this
drop down menu.
Detail of a Backplane

Decoration: hatching
Decoration: hatching

CompactPCI Backplanes
General

Order numbers Accessories

General and technical Information

The CompactPCI bus is compatible with the PCI bus known from the PC world as far as the electrical specifications are concerned.
The mechanical specifications were adapted to the commonly used Euro-board plug-in system in the 19” card rack. Therefore this bus is also suitable for industrial purposes. Previously unattained signal speeds supported by the layout technology developed by Hartmann Elektronik guarantee more stability and reliability for assemblies operating in the limit range.

The backplanes manufactured by Hartmann Elektronik are distinguished by a completely novel energy buffering feature which works across the entire frequency range.
This feature guarantees improved reliability thanks to more stable supply voltages directly at the slot in conjunction with fluctuating loads.

Chassis GND connection

A continuous electrically conductive chassis GND surface is located in the area where the bus board is mounted on the card rack. An M3 screw connection is available to connect the chassis ground. By installing a connecting bracket or terminal bar, the chassis GND can be connected to GND in a low-resistance star arrangement.

JTAG connector

A separate 6-pin connector for JTAG boundary scan is implemented on the backplane.
Faster, simpler system initialization and testing by means of the JTAG bus even in the completely mounted state are achieved by direct access via an additional connector on the backplane.

Utility connector

The special signals to the power supply unit and external LEDs are routed to separate plug-in connectors on the backplanes. Depending on the backplane type, either a 10-pin or a 14-pin connector is used.

ATX connector

The ATX power supply connector used in the PC world is integrated in some backplane variants.
This results in a highly efficient and economic solution for supplying power to the backplane via ATX connectors and for the wiring of fans and drives.

Pin Assignments

Pin ATX connector 10-pins Utility
connector
RM = 2.0 mm
10-/14-pins Utility
connector
RM = 2.54 mm
IPMB connector JTAG connector
1 +3.3 V PRST- PRST- IPMB_SCL GND
2 +3.3 V FAL- PRST- GND TCK
3 GND DEG- DEG- IPMB_SDA TMS
4 +5 V +3.3 V Sense DEG- IPMB_PWR TRST-
5 GND +3.3 V FAL- SMB_RSV
SMB_ALERT
TDI
6 +5 V GND Sense (3.3 V) FAL- TDO
7 GND +5 V Sense 5 V
8 PW-OK2) GND +5 V Sense
9 +5 V SB2) GND Sense (5 V) GND
10 +12 V GND Sense (5 V)
11 +3.3 V3) +3.3 V
12 -12 V +3.3 V Sense
13 GND GND
14 PS-ON4) GND Sense (3.3 V)
15 GND
16 GND
17 GND
18 -5 V5)
19 +5 V
20 +5 V
1) : via jumper J4 to DEG-
2) : to jumper J6
3) : also Main 3.3 V Sense
4) : via jumper J2 to GND
5) : to jumper J5

PICMG 2.11 R1.0 P47 Power
Connector Pin Assignments
Pin Signal Pin Signal Pin Signal
1 V1 2 V1
3 V1 4 V1
5 RTN 6 RTN
7 RTN 8 RTN
9 RTN 10 RTN
11 RTN 12 RTN
13 V2 14 V2
15 V2 16 V2
17 V2 18 V2
19 RTN 20 V3
21 V4 22 RTN 23 Reserved
24 RTN 25 GA0 26 Reserved
27 EN- 28 GA1 29 V1ADJ
30 V1 Sense 31 GA2 32 V2ADJ
33 V2 Sense 34 S RTN 35 V1 Share
36 V3 Sense 37 IPMB_SCL 38 DEG-
39 INH- 40 IPMB_SDA 41 V2 Share
42 FAL- 43 IPMB_PWR 44 V3 Share
45 CGND
46 ACN/+DC IN
47 ACL/-DC IN
V1 (typically 5 V)
V2 (typically 3.3 V)
V3 (typically +12 V)
V4 (typically -12 V)
RTN (GND)

PICMG 2.11 R1.0 DIN Type M Power
Connector Pin Assignments
Pin Row A Row B Row C
2 ACL
5 ACN
8 ---
11 CG
13 SP +3.3V EN-
14 INH- INH- DEG-
15 ISH +3.3V FAL-
16 5S- +3.3V +3.3V
17 5S+ +3.3V +3.3V
18 +3.3V +3.3V +3.3V
19 +12V +12V +12V
20 -12V -12V -12V
22 +5V
25 GND
28 +DC
31 -DC

CompactPCI System Slot 64-bit Connector
P2/J2 Connector
22 GND GA4 GA3 GA2 GA1 GA0 GND
21 GND CLK6 GND RSV RSV RSV GND
20 GND CLK5 GND RSV GND RSV GND
19 GND GND GND SMBB SDA SMBB SCL SMB RSV GND
18 GND BRSVP2A18 BRSVP2B18 BRSVP2C18 GND BRSVP2E18 GND
17 GND BRSVP2A17 GND PRST# REQ6# GNT6# GND
16 GND BRSVP2A16 BRSVP2B16 DEG# GND BRSVP2E16 GND
15 GND BRSVP2A15 GND FAL# REQ5# GNT5# GND
14 GND AD[35] AD[34] AD[33] GND AD[32] GND
13 GND AD[38] GND V(I/O) AD[37] AD[36] GND
12 GND AD[42] AD[41] AD[40] GND AD[39] GND
11 GND AD[45] GND V(I/O) AD[44] AD[43] GND
10 GND AD[49] AD[48] AD[47] GND AD[46] GND
9 GND AD[52] GND V(I/O) AD[51] AD[50] GND
8 GND AD[56] AD[55] AD[54] GND AD[53] GND
7 GND AD[59] GND V(I/O) AD[58] AD[57] GND
6 GND AD[63] AD[62] AD[61] GND AD[60] GND
5 GND C/BE[5]# GND V(I/O) C/BE[4]# PAR64 GND
4 GND V(I/O) BRSVP2B4 C/BE[7]# GND C/BE[6]# GND
3 GND CLK4 GND GNT3# REQ4# GNT4# GND
2 GND CLK2 CLK3 SYSEN# GNT2# REQ3# GND
1 GND CLK1 GND REQ1# GNT1# REQ2# GND
P1/J1 Connector
25 GND 5V REQ64# ENUM# 3.3V 5V GND
24 GND AD[1] 5V V(I/O) AD[0] ACK64# GND
23 GND 3.3V AD[4] AD[3] 5V AD[2] GND
22 GND AD[7] GND 3.3V AD[6] AD[5] GND
21 GND 3.3V AD[9] AD[8] M66EN C/BE[0]# GND
20 GND AD[12] GND V(I/O) AD[11] AD[10] GND
19 GND 3.3V AD[15] AD[14] GND AD[13] GND
18 GND SERR# GND 3.3V PAR C/BE[1]# GND
17 GND 3.3V IPMB SCL IPMB SDA GND PERR# GND
16 GND DEVSEL# GND V(I/O) STOP# LOCK# GND
15 GND 3.3V FRAME# IRDY# GND TRDY# GND
12-
14
KEY AREA
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
10 GND AD[21] GND 3.3V AD[20] AD[19] GND
9 GND C/BE[3]# GND AD[23] GND AD[22] GND
8 GND AD[26] GND V(I/O) AD[25] AD[24] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
6 GND REQ0# GND 3.3V CLK0 AD[31] GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT0# GND
4 GND IPMB PWR HEALTHY# V(I/O) INTP INTS GND
3 GND INTA# INTB# INTC# 5V INTD# GND
2 GND TCK 5V TMS TDO TDI GND
1 GND 5V -12V TRST# 12V 5V GND
Pin Z A B C D E F
length of pins short medium long

 

CompactPCI Peripheral Slot Rear-Panel I/O Connectors
P2/J2 Connector
22 GND GA4 GA3 GA2 GA1 GA0 GND
21 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
20 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
19 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
18 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
17 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
16 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
15 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
14 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
13 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
12 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
11 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
10 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
9 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
8 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
7 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
6 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
5 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
4 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
3 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
2 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
1 GND BP(I/O) BP(I/O) BP(I/O) BP(I/O) BP(I/O) GND
P1/J1 Connector
25 GND 5V REQ64# ENUM# 3.3V 5V GND
24 GND AD[1] 5V V(I/O) AD[0] ACK64# GND
23 GND 3.3V AD[4] AD[3] 5V AD[2] GND
22 GND AD[7] GND 3.3V AD[6] AD[5] GND
21 GND 3.3V AD[9] AD[8] M66EN C/BE[0]# GND
20 GND AD[12] GND V(I/O) AD[11] AD[10] GND
19 GND 3.3V AD[15] AD[14] GND AD[13] GND
18 GND SERR# GND 3.3V PAR C/BE[1]# GND
17 GND 3.3V IPMB SCL IPMB SDA GND PERR# GND
16 GND DEVSEL# GND V(I/O) STOP# LOCK# GND
15 GND 3.3V FRAME# IRDY# BD SEL# TRDY# GND
12-
14
      KEY AREA      
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
10 GND AD[21] GND 3.3V AD[20] AD[19] GND
9 GND C/BE[3]# IDSEL AD[23] GND AD[22] GND
8 GND AD[26] GND V(I/O) AD[25] AD[24] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
6 GND REQ# GND 3.3V CLK AD[31] GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT# GND
4 GND IPMB PWR HEALTHY# V(I/O) INTP INTS GND
3 GND INTA# INTB# INTC# 5V INTD# GND
2 GND TCK 5V TMS TDO TDI GND
1 GND 5V -12V TRST# 12V 5V GND
Pin Z A B C D E F
length of pins short medium long

 

Physical Slot Addresses GA0 to GA4 alternative as BP(I/O)

Mating Connectors and pins (e. g.)

mating connectors to Steckverbinder Gehäuse Kontakte
ATX connector
Molex 39-01-2200 Molex 39-00-0039
10-pin Utility connector
FCI 90311-010 FCI 77138-001
14-pin Utility connector AMP 1-215911-4

IPMB connector
Molex 51021-0500 Molex 50079-8100
JTAG connector JST 06SR-3S

Detail of a Backplane