General and technical information to VME, VME64 and VME64x

Technical data

		VME J1	VME J1 / J2
Base material		Fiberglass epoxide acc. to DIN 40802 (type FR4)
Layer structure		Optimized for best HF behavior. Outer layers designed as shielding areas.
Ohmic resistance of signal lines		< 1.5 Ω	< 1.5 Ω
PCB thickness		3.2 mm	3.2 mm
Surge impedance Z of signal lines		60 Ω	55 Ω
Basic power consumption, both ends terminated		Active: < 0.1 A Passive: < 1.0 A	Active: < 0.2 A Passive: < 1.3 A
Power supply connection
	Terminal bar with screw-type terminal M6	---	---
	Screw-type M4 and Faston 6.3 x 0.8 mm	X	---
	< 5 slots:	Faston 6.3 x 0.8 mm	---
	Permissible current loading of terminal bar	---	200 A
	Permissible current loading of a combined double spade/screwtype connection	25 A	25 A
	Permissible current loading of Faston connector	10 A	10 A
	Permissible current loading of assembly per slot	at +5 V – 4.5 A at +12 V – 1.5 A at –12V - 1.5 A at +5 VSTDBY – 1.5 A	at +5 V - 9.0 A at +12 V - 1.5 A at –12 V - 1.5 A at +5 VSTDBY – 1.5 A
Termination ON/IN board		passive or active	passive or active
Installation height		3 U	6 U
Slot spacing		4 HP (different slot spacing upon request)
Connectors		Press-fit quality class 2
Connectors		96 pins DIN 41612	96 pins DIN 41612
Operating temperature range
	Active termination	0 °C … +70 °C	0 °C … +70 °C
	Passive termination	–40 °C … +80 °C	–40 °C … +80 °C
Relative humidity		90 %, non-condensing	90 %, non-condensing

		VME64	VME64x
Base material		Fiberglass epoxide acc. to DIN 40802 (type FR4)
Layer structure		Optimized for best HF behavior. Outer layers designed as shielding areas.
Ohmic resistance of signal lines		< 1.5 Ω	< 1.5 Ω
PCB thickness		3.2 – 4.0 mm	4.3 mm
Surge impedance Z of signal lines		60 Ω	55 Ω
Basic power consumption, both ends terminated		Active: < 0.1 A Passive: < 1.4 A	Active: < 0.1 A Passive: < 1.6 A
Power supply connection
	Terminal bar with screw-type terminal M6	X	X
	Screw-type M4 and Faston 6.3 x 0.8 mm	X	X
	< 5 slots:	Faston 6.3 x 0.8 mm	Faston 6.3 x 0.8 mm
	Permissible current loading of terminal bar	200 A	200 A
	Permissible current loading of a combined double spade/screw-type connection	25 A	25 A
	Permissible current loading of Faston connector	10 A	10 A
	Permissible current loading of assembly per slot	at +5 V – 9.0 A at +12 V – 1.5 A at –12 V - 1.5 A at +5 V STDBY – 1.5 A	at +3.3 V - 12.5 A at +5 V – 9.0 A at +12 V – 1.5 A at –12 V – 1.5 A at +5 V STDBY - 1.5 A at +48 V (38-75 V) – 3.0 A
Termination ON/IN board		passive or active	passive or active
Installation height		6 U	3 U/6 U/6.5 U
Slot spacing		4 HP (different slot spacing upon request)
Connectors		Press-fit quality class 2
Connectors		160 pins compatible with C96 ---	160 pins compatible with C96 optionally J0, spacing 2 mm 95 / 133 pins
Operating temperature range
	Active termination	0 °C … +70 °C	0 °C … +70 °C
	Passive termination	–40 °C … +80 °C	–40 °C … +80 °C
Relative humidity		90 %, non-condensing	90 %, non-condensing